Faucets are essential components in all homes that are widely used in the kitchen, bathroom, and other areas. Since faucets are among the most important parts of the plumbing in a house and kitchen, it is better to take necessary measures to maintain, prevent deterioration, and repair them.

Considering that the purpose of using faucets is to regulate water pressure and prevent water splashing, sometimes faucets themselves may encounter problems and not function properly. One of the significant issues that may occur with faucets is their deterioration.

Of course, using high-quality sanitary faucets during purchase will increase their lifespan, allowing you to use them for a long time. Sahand sanitary faucets are among the best faucets that can be used for an extended period.

Faucet Deterioration

Due to the extensive use of faucets, it is better to pay attention to their maintenance and repair because they may not function properly. One of the fundamental problems that faucets may face is deterioration. When faucets deteriorate, they can no longer retain water properly and prevent splashing.

This type of problem may occur in all faucets, initially visible in water dripping but may progress to water splashing over time. For example, when turning off the faucets completely, water may drip or continue to flow under high pressure. In such cases, the faucets have deteriorated. Therefore, necessary measures should be taken to prevent faucet deterioration and repair.

Reasons for Faucet Deterioration and Repair

Faucets may deteriorate due to various factors, one of which is reaching the end of their useful life. This problem may occur more in faucets made of weaker metals. The useful life of such faucets will be about two years. However, deterioration may occur due to various factors such as improper use, for example, improper opening and closing of faucets.

In such cases, by minimizing the opening and closing of faucets, you can help extend their useful life. Other reasons, such as changing the water flow path from hot to cold water, can weaken the faucets. If water flows through a path for a long time, it can cause corrosion in metals, ultimately leading to faucet deterioration, which is more common in kitchen faucets.

Repairing Deteriorated Faucets

Faucet deterioration may occur in the deteriorated part, in which case the faucet stem must be replaced. The first step in replacing the faucet stem is to shut off the main water supply. This can be done by shutting off the main water supply at the house's water flow section. However, in some cases, it may be better to replace it through the valves between the water faucet and the main water supply valve. The latter method is preferable, shutting off the water closest to the main water supply valve.

In faucets that use both hot and cold water, both water paths must be shut off, and one path cannot be neglected. After performing this method, necessary actions can be taken regarding faucet deterioration and repair.

Repairing Faucet Deterioration

For faucet deterioration and repair, the following steps are recommended:

Shutting off the faucets: Initially, the water faucets must be shut off.

Removing faucet accessories: After shutting off the faucets, the next step is to remove the faucet accessories, which can be done by removing covers or loosening screws.

Removing the stem: After removing the faucet's side accessories, the faucet stem must be removed. In this step, the purchased stem should match the previous one. It is advisable to buy high-quality faucets, although the price of quality faucets may be slightly higher. The higher the price of quality faucets, the higher their quality will be. In this case, the faucets can have a longer lifespan. Quality faucets' price will be compensated for in the long run, including Sahand sanitary faucets.

Placing the stem in the best sanitary faucets:

After completing all the steps, the purchased stem for the best sanitary faucets should be properly placed, and the remaining accessories on the ground should be carefully placed in their positions. When placing side accessories, it is essential to be precise, as placing a piece incorrectly can cause many problems. After installing the stem, it is advisable to connect the water flow and check if replacing the stem has solved the water problem or not.

If the kitchen faucets have deteriorated and problems occur in the water flow, you can replace the stem through the following steps. However, to prevent frequent deterioration of faucets, it is better to use Sahand sanitary faucets to prevent repeated damage.

Price of Sanitary Faucets:

To purchase various types of the best sanitary faucets, it is better to buy from reputable stores. One of these stores is Sahand, which offers various kitchen faucets at the best price and high quality.

However, before making a purchase from this site, it is advisable to inquire about the price of sanitary faucets because faucet prices are not always fixed and may change due to various factors. Therefore, necessary information such as the material of the faucets, the price of sanitary faucets, and other details should be obtained.

Clogging of plumbing fixtures and its repair

Features of aluminum utensils and its characteristics

What is a turbine?

Worm as a UV stabilizer

The importance of brick walls in interior decoration